Findings

Unfinished wood, 40mm diameter x 3mm thick 100 piece minimum @ $.07 each

Gold plated brass. 17mm diameter x 7mm high. bead size 16mm to 20mm 

Steel stamping 2 inches diameter

Lost wax brass casting 14mm top diameter 8mm center diameter 17mm long 1.5mm thru hole. Unplated.

5 mm long brass spring style end cap 2mm inside diameter 4mm outside diameter Can be crimped on or glued onto the end of the cord. 1 gross minimum ...

Imitation rhodium plated steel setting 31mm diameter x 7mm high center opening for 14mm rivoli-style rhinestone

Premium quality, rhodium plated with an engravable mat finish center 35mm x 27mm with a 32mm split ring individually boxed 

Gold plated brass 1 3/4" x 1 1/2" wide One dozen minimum

25 x 18mm Octagon; 4 prong, sew-on setting for Pointed-Back Stones. 1 gross minimum.

Unplated brass open-back setting. Minimum = 3 gross @ $4.00/gross.

1-1/2 Inch Coil Pin used for pin backs

Brass Army military badges with threaded post and nut  1 1/4 inch x 1 inch wide.

Vintage 6mm plastic white luster pearl beads with brass links and 7mm brass end rings. 6 -1/4 inches overall length.

Cast-Metal Button; w/Plastic Pearl

Raw brass end-cap for 2.45 x 1.95mm rectangle snake chain. Can be soldered, glued, or crimped.

Fold over end cap for 9.7mm x 4.5mm oval mesh chain

Plated steel D ring 25mm x 20mm x7mm inside dimension 2.7mm diameter wire use drop down to choose color gold, nickel plating 72 piece minimum each ...

Graduated 3 pearl tassel 4, 6, 8mm white luster pearls with four 1 inch copper coated steel chains 2 inch overall length

Wood cabocho 44 mm diameter disc, with 23mm x 1mm deep setting and concave back

Copper coated steel double ring 51mm & 40mm 

Plated ear clip with 34mm diameter lace edge setting, 3nmm deep use drop to choose gold or rhodium plating 

Gold plated 2 1/4 inch diameter domed aluminum stamping with 1.2mm top hole, (very Light)

14mm x 11mm oval no loop *Please note that these do not have loops. These are intended for soldering or gluing. Min = 1 gross.

Brass settings for navette shaped rhinestones. Available in both open and closed back settings The open back version is ideal for unfoiled rhinesto...

Unplated brass 4-prong setting. Minimum = 4 gross

Imitation rhodium plated steel 55 mm x 35mm (2 3/16 x 1 3/8 inches) with etched pattern surface

Solid copper Stamping 39mm diameter, center oppening 11mm with a 2.5mm hole width of pedals 5mm 

For 8 x 4 Pointed back octagons. Nickel Plated Brass with 4 prongs and 4 holes in back. Minimum = 3 gross for $15.00

For 8 x 4mm Pointed back navettes. Nickel Plated Brass with 4 prongs and 4 holes in back. Minimum = 3 gross for $15.00.

For 18 MM Flat-Back stones. Nickel Plated Brass with 4 prongs and 4 holes in back. Minimum = 1 gross for $10.00.

For 14 MM Flat-Back stones. Nickel Plated Brass with 4 prongs and 4 holes in back. Minimum = 2 gross for $15.00

High quality 14 x 10mm raw brass 4 prong rectangle setting with open back. Fits Swarovski Article #4510 and 4527 series Made in Germany 

High quality, 18mm x 13mm raw brass, 4 prong octagon settings. Available in open back and close back versions Made in Germany

Round Bezel Cup w/serrated edge Wall height approximately 2mm.

Raw brass, hollow settings. Overall diameter is 28mm round at the base and 6mm high. Made for a 22mm flat back stone. 1/2 gross minimum.

Octagon 4 prong, sew-on setting for Pointed-Back Stones 1 gross min.

Navette and 21ss Chaton setting for Pointed-Back Stones.$2.00 per gross. 5 gross min.

Copper coated steel hoop earrings 2 1/8 inch diameter x 2.1mm twisted wire with 7/16 inch surgical steel post and clutch,with rubber sleeve ready f...

Raw steel 1 1/ 2 x 1 1/2 inches square with 1/16 (1.2mm top hole) 50 piece minimum @ $15.00

Rhodium plated 2 1/2" diameter one dz. minimum @$1.00 ea.

Brass ox plated 1 7/8" x 1 1/8" 

Matte gold plated brass and matt silver plated 1 3/8 inches x 1 3/8 inches use drop down to choose finish 40 piece minimum @ $12.00

Raw brass die struck stamping 2 inch diameter 24 piece minimum @ $ 12.00

Gold plated steel 1 1/2 inches x 1 inch with 1mm top hole 24 piece minimum @ $10.00

Heavy silver plated steel 2 3/4" long x 2" wide 1 dozen minimum @$1.50 ea.

28mm split ring with 1 1/4 inch x 2 inch flexible vinyl plastic ideal for your custom lables use drop to chose color 50 piece minimum per color @ $...

28mm nickel plated with swivel attchment 100 piece minimimum @ $ 6.00