BYESUMMER Sale Items

Plated brass 18mm with 3mm,ball and 2mm coil. use drop down to choose color - gold , imitation rhodium

Gold plated die struck brass stamping 3 1/2 inches long x 1 1/8 inches wide

Copper coated steel 38mm diameter with chain bail 3 dozen minimum @ $.50 each

Unplated brass 4-prong setting. Minimum = 4 gross

Gold plated with surgical steel 7/16 inch post and disc clutch 27mm diameter x 6mm thick with 20mm opening for stone or epoxy stone not included...

Basic 25 x 18mm x 2.5mm deep unplated brass oval setting for flat back stones

Round Bezel Cup w/serrated edge Wall height approximately 2mm.

Raw steel stamping available in 1 1/4 inch diameter and 1 3/4 inch with a 3/32 center hole use drop down to choose size can be painted

Raw steel 1 3/4" diameter 3/32"rivet hole. 1/2 gross minimum @$.10 ea.

Raw brass Rhinoceros stamping 1 3/8 inches long x 5/8 inches with a 1.3mm top hole 72 piece minimum @ $12.00

Gold plated brass 2 1/4" x 1 1/2" wide one dozen minimum

Round jump rings for jewelry linking as well as for chain maille. Nickel silver plate. 3mm outside diameter and 20 gauge wire.

Gold plated steel connector 14.5mm long x 5.5mm wide

12mm x 6mm Imitation rhodium plated brass. Lead and nickel free.  Please use the drop down menu for quantity discounts

Two strand gold plated cast metal. 23mm diameter with 18mm recess for a glass, resin or semiprecious cabochon. Made in the USA 

Gold plated steel wire neck collars.  5-5/8 inches in diameter. The thickness of the wire is 12 gauge (.082 inches) Hooked at both ends.

Assortments will vary from lot to lot with 32mm split ring

Plated brass up eyes 4mm x 6mm pad for gluing hole in eye measures 1.5mm use drop down to choose color: gold or rhodium

Raw Brass 1/8 inch diameter x 1/4 inch long

Raw brass eye pins 2-7/8 inches long* X .032 diameter wire (20 gauge)  Extra large 5mm outside diameter of eye *measured from point of pin to top o...

Copper-coated over steel. 1-3/4 inches long from top of cap to bottom. 12 strands of copper-clad steel curb chain. Made in the Japan.

20mm x 7mm thick, white lucite plastic, with 2mm loop opening

Raw brass 23mm jump ring 12 Gage (.084 diameter wire)

Raw brass 16mm jump ring 14 Gage (.062 diameter wire)

Raw brass bolo slide/back 18mm x 5mm with 2.4mm Rivett hole

Raw brass die struck stamping 31mm diameter

Brass plated 18mm x 13mm steel setting with 3/32 inch rivett hole (2.3mm) 1 gross minimum

Brass Mini hing 4.1 x 10.5mm (5/32 x 7/16 inch)

14mm diameter gold plated brass bead cap 100 piece minimum

Raw brass earring setting 18mm x13mm with 7/16 inch surgical steel post and clutch 72 piece minimum

32mm split key ring with 37mm x 14mm rhodium plated zinc alloy swivel lobster clasp 50 piece minimum

Gold plated brass filligre stamping 2 13/16 x 1 11/16 inches (72mm x 43mm) 1 dozen minimum

Gold plated brass 4 prong closed back 15mm x 7mm navette setting 144 piece minimum

Copper coated steel bell with swirl pattern, 1 inch diameter x 3/4 inch high.

Raw Brass 30mm setting.

3 inches long, 6 strand chain tassel. Made with copper clad steel and 2.2mm curb chain

Gold plated aluminum 18mm wide x 17mm long with three 1.4mm holes

Tassel

 Acrylic plastic, oval bead mix 12mm diameter x 14mm long  approx. 350 beads per pound

6, 8 & 10 mm transparent milk glass beads approx 550 beads per pound made in Japan

Acrylic plastic bead mix, 10mm diameter x 12mm long Approx. 335 beads per pound

Vintage Tin Table Cut glass facetted rhinestones in a variety of colors with gold tone foil. The facets are pressed into the glass and the table i...

Swarovski # 5040 8mm diameter x 5.5mm topaz briolette / rondelle

Swarovski #5000 4mm round Crystal AB Buying options: 1 gross (144 pieces) for $22.00 or a volume discount for a 10 gross pack for $198.85 10 gross ...