Findings

Vintage gold plated casting 24mm x 15mm  with 7mm pearl 

Gold Plated brass cuff link with  20mm rolled edge setting 24 pieces ( 1 dozen pair )

Raw Brass 23mm lace edge setting with rivet hole

Sterling plated plastic charm 32mm x 18mm with 2mm top hole

Copper coated steel lace edge setting with top loop

Gold plated casting 1 3/16 x 9/16 inches (31mm x 21mm)  with crystal rhinestone  eye

 Brass tone, India  coin charm with 3mm bail opening

Brass ear clip 20mm long with solder pad and rivet hole

Gold plated brass head pins 7/8 inch long .035 (19 gage) with domed head

Raw brass heart stamping 11mm wide x 13mm length and 1.2mm top hole

Plated 35mm (1 3/8 inch) diameter. with 4mm cup setting   and center hole for riveting 3/32 inch (2.3mm) available in imitation rhodium 

Nautical style metal wine glass charms 3 of each style

15mm x 14mm heart no loop locket*Please note that these do not have loops. These are intended for soldering or gluing. Min = 1 gross.

Steel stamping imitation rhodium plated 

Rainbow  sticker Assortment 3/4 inch square will fit pendant sku # FD00117

Steel stamping with 2mm top hole

Steel Flower in Yellow. Measures 3" in Diameter and Approx 1/2" deep. Inside base measures 5/16 of an inch. Each Leaf has 3 holes at each tip. Min=...

2 strand high quality, gold plated cast metal clasp 24mm x 21mm 1 dozen minimum @ $.75 each

Gold plated head pins 1-3/4" long with 2mm head 21 gauge wire (0.029 inch diameter) approx. 2000 pieces per pound One pound minimum @ $25.00

Raw brass heart 6.4mm x 5.4mm x 1.4m thick

Chain tassel; tassels; tassel; finding part; findings;

Copper coated steel stamping 34mm diameter (1 3/8 inches)

Imitation rhodium plated brass 42mm diameter  with 1.25mm (.093) center hole

20mm cat face on a 30mm key ring 

Copper Coated "Liberty-Bell" style bells 1 inch diameter X 3/4inches high. 

Raw brass 58mm diameter emdless earring hoops. 1.3mm diameter hollow tubing Surgical steel ear wire 

Raw brass, assorted shapes and sizes, Approx 6mm to 20mm approx 320 to 370 pieces 1/4 pound minimun @ $10.00

Two strand gold plated cast metal. 23mm diameter with 18mm recess for a stone or resin clay. 

Rhodium plated, 18mm diameter, open ring. stamped sterling

Gold plated steel heart finding 32mm x 29mm x .67mm thick with 1.8mm top hole

3 inches long, 6 strand chain tassel. Made with Copper clad steel 2.2mm curb chain

Raw brass ear clip 21mm long with 6mm pad for soldering or gluing 1 gross @ $10.00

Assorted brass findings. Assortments will vary from mixture to mixture. Made in USA. 2 pound minimum.

Prym Dritz # 2 (1 1/2 inches) gilt plated steel 10 gross (1440 pieces) per order

Prym Dritz # 1 (1 1/16 inches) gilt plated steel.  10 gross per order

2 1/16 x 2 1/16 inch glass mirror

Gold plated steel hoop with 2 rings 26mm diameter 1mm diameter wire 

Raw brass, high-dome clip earrings. 28mm diameter. 13mm high dome 

Gold plated casting with 15mm inside diameter x 1.25mm deep cup with 3/8 inch surgical post and clutch.

Raw brass with loop,ball and coil. Seven gross (1,000 pcs) minimum

Un plated brass 37mm x 27mm with jump ring bail 1 dozen ninimum @ $1.25 each

Surgical steel earring clutches. 6mm x 4mm Use drop down to choose quantity

Raw Steel, daped stamping 34mm diameter (1 3/8 inches) 3/32 inch hole (2.5mm) 100 piece minimum @ $18.00

Basic 25 x 18mm x 2.5mm deep unplated brass oval setting for flat back stones

Raw brass hi-dome clip back filigree earring 14mm diameter x 8mm high 

Raw hollow brass tubing 2mm diameter 1 7/16 (36mm) outside diameter with surgical steel post and rubber sleeve ready for plating 1 gross minimum 2...

Solid Brass un plated hoop earrings 2 5/8 inch diameter (68mm) 2.3mm diameter wire with 3/8 inch surgical steel post and surgical steel clutch 1/2...

Raw Brass Flat back high dome finding 30mm diameter with 25mm x 12mm high dome with cross hatch design 4 dozen minimum @ $24.00